Sph10H-Fm Configuration Setting; Enabling/Disabling Voice Activated Phone Answering - Sena SPH10H-FM User Manual

9. SPH10H-FM CONFIGURATION SETTING

You can set the configuration of the SPH10H-FM by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying "Configuration
menu".
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature
by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10H-FM will exit the configuration and goes back
to stand-by.
5. If you want to exit the configuration immediately,
rotate the Jog Dial until you hear a voice prompt,
"Exit configuration", and tap the Phone Button.
The voice prompt for each menu item is as below:
(1) VOX phone
(2) VOX intercom
(3) Voice prompt
VOX phone
Exit configuration
Delete all pairings
RDS AF setting
9.1 Enabling/Disabling Voice Activated Phone
Answering
Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can answer incoming calls
by simply saying a word loudly enough. For example,
when you hear a series of beeps for an incoming call,
SPH10H-FM
(4) RDS AF setting
(5) Delete all pairings
(6) Exit configuration
VOX intercom
Voice prompt
"VOX phone"
Enable
Tap the Phone Button
Tap the Jog Dial
17