Initial Start-Up - Groen TDB/6 Operator's And Service Manual

OM-TDB/6
VOLTAGE
208 Volts
240 Volts
BE SURE OPERATORS READ, UNDERSTAND AND FOLLOW THE OPERATING INSTRUCTIONS,
CAUTIONS AND SAFETY INSTRUCTIONS CONTAINED IN THIS MANUAL.
Now that the kettle has been installed, you should
test it to ensure that the unit is operating correctly.
1. Remove all literature and packing materials
from inside and outside of the unit.
2. Turn on the electrical service to the unit.
3. Pour 1-2 quarts of water into the kettle.
4. Following "To Start Kettle" instructions in the
"Operation" section of this manual, begin
heating the water at the highest thermostat
setting. The heating indicator light should
come on immediately, and heating should
continue until the water boils.
ELECTRICAL CHARACTERISTICS
PHASE
One
One

Initial Start-Up

IMPORTANT
A simple turn of the thermostat controls the
Groen TDB/6 Kettle.
6
Power
3.3 Kilowatts
4.0 Kilowatts
WARNING
AVOID ALL DIRECT CONTACT WITH HOT
SURFACES. DIRECT
COULD RESULT IN SEVERE BURNS.
AVOID ALL DIRECT CONTACT WITH HOT
FOOD OR WAT ER
DIRECT CONTACT COULD
SEVERE BURNS.
5. To shut down the unit, turn the thermostat dial
to "OFF".
If the unit functions as described above, it is ready
for use. If the unit does not function as intended,
contact your local Groen Certified Service Agency.
Current
16 Amperes
17 Amperes
SKIN CONT ACT
IN THE KETTLE.
RESULT IN