Initial Start-Up - Groen TDB/7 Operator's And Service Manual

https://appliancetechmanuals.com
BE SURE ALL OPERATORS READ, UNDERSTAND AND FOLLOW THE OPERATING
INSTRUCTIONS, CAUTIONS, AND SAFETY INSTRUCTIONS CONTAINED IN THIS MANUAL.
Now that the kettle has been installed, you
should test it to ensure that the unit is operating
correctly.
1. Remove all literature and packing
materials from inside and outside of the
unit.
2. Turn on the electrical service to the unit.
3. Pour 1-2 quarts of water into the kettle.
4. Following "To Start Kettle" instructions in
the "Operation" section of this manual,
begin heating the water at the highest
thermostat setting. The heating indicator
light should come on immediately, and
heating should continue until the water
boils.

Initial Start-Up

A simple turn of the thermostat controls the Groen TBD/7 Kettle
IMPORTANT:
WARNI
AVOID ALL DIRECT CONTACT WITH HOT
SURFACES.
COULD RESULT IN SEVERE BURNS.
AVOID ALL DIRECT CONTACT WITH HOT
FOOD OR WATER IN THE KETTLE.
DIRECT CONTACT COULD RESULT IN
SEVERE BURNS.
5. To shut down the unit, turn the thermostat
dial to "OFF".
If the unit functions as described above, it is
ready for use. If the unit does not function as
intended, contact your local Groen Certified
Service Agency.
9
OM/SM-TDB/7
NG
DIRECT SKIN CONTACT