Primex 14000 Series Installation & User Manual page 5

R
EGULATORY
Federal Communications Commission (FCC) / Industry Canada (IC)
License Requirements
Operation of the Transmitter requires a FCC/IC operating license, which must be obtained prior to operation.
l
FCC licenses must be renewed every 10 years and the IC licenses must be renewed annually.
l
As a service, Primex Wireless will file the license application if the end-user desires it. An end-user that does not want
l
Primex Wireless to file for the original site license will be required to complete a waiver form, file the required
application, and receive a valid license from the FCC/IC prior to use.If you have any questions or need any assistance,
please contact Primex Wireless at 1-800-537-0464.
Primex Wireless requires a copy of the licenses in order to complete the factory presets.
l
Product Compliance
This device complies with Part 90 and Part 15 of the FCC rules and RSS-210 of Industry Canada.
l
Operation of this device is subject to the following two conditions:
l
1. This device may not cause harmful interference.
2. This device must accept any interference, including interference that may cause undesired operation.
Changes or modifications to any part of the Primex Wireless System components not expressly
approved by Primex Wireless could void the userʼs FCC/IC authority to operate the equipment.
Radio Frequency (RF) Exposure
To comply with FCC OET65 and Industry Canada RF exposure requirements, the antenna is only to be used or installed in locations
where the following antenna separation guidelines exist when the transmitter is in operation. Distance above roofline is for direct line
of sight only, as illustrated in Figure 1.
Distance Above Roofline: 8.95' (2.72m)
Figure 1: Distance Above Roofline Illustration
Primex Wireless
C
OMPLIANCE
14000 Series Transmitter - External Antenna Installation & User Guide
1