Transmitter Operation
Time Zone
The time zone of your location is not shown on the display. However, when the transmitter has received a valid time from the GPS
Receiver, the correct time zone can be checked by verifying that the correct hour is displayed. The transmitter can be set for all 24 time
zones around the world and 1/2-hour time zones.
12-Hour or 24-Hour Time
The 12/24-Hour option only affects the transmitter LCD display. If AM or PM is on the display, then the 12-hour option is selected with
switch #4. If neither AM nor PM is on the display, then the 24-hour option is selected.
Analog System Clocks are 12-hour clocks.
l
ED Digital System Clocks have a selectable jumper option to display either 12-hour or 24-hour time regardless of the
l
transmitter 12/24 option setting.
Status of GPS Receiver Communication
The status of the GPS Receiver is indicated by the GPS Communication indicator.
When the "Y"-like symbol
l
communication between the GPS Receiver and the transmitter.
When the transmitter is receiving valid time data from the GPS Receiver, the three parentheses
l
motion pattern. If these symbols are not displayed, see Troubleshooting.
Power Failure
The system has a fail-safe design. If the failure of a system component or power loss to a component occurs, all downstream
components continue normal operations using their own internal time base. If after a specified period, communication has not been
restored, a visual that indicates a loss of communication appears and remains until communication is restored.
EXAMPLE:
Primex Wireless
is displayed, the GPS Receiver is connected to the transmitter and there is proper
Red flashing LED on the transmitter; flashing colons on LED digital clocks; double stepping of second hand on ana-
log clocks.
14000 Series Transmitter - External Antenna Installation & User Guide
Time Zone
will sequence in a
21