Installation and Configuration
13. Tighten all nuts to secure.
14. Next, route the antenna cable. For additional information, see "Route Antenna LMR 400 Coaxial Cable" located on page 14.
Figure 5: Non-Penetrating Mount Illustration
Install Penetrating Antenna Kit
The Penetrating Antenna Kit contains the materials required to mount the antenna to a wooden pole or masonry wall. A 5/8" (1.58cm)
diameter mounting hole is required and the maximum diameter of the pole or wall thickness is 14" (35.56cm).
Kit Contents
The kit is supplied with the following parts. If any of these items are missing, please contact Primex Wireless.
Description
5' by 1.25" rigid galvanized conduit section
5' by 1" rigid galvanized conduit insert
Antenna mounting clamp
1/2" hex head bolt
1/2" bolt washer
1/2" lock washer
1/2" hex nut
Primex Wireless
14000 Series Transmitter - External Antenna Installation & User Guide
Mount the Antenna Mast
Qty
1
1
2
2
2
2
2
11