Specifications - Swisscom Aton CL400 User Manual

Authorisation
This device is intended to be operated on
the ISDN Swiss network.
Country-specific conditions have been
taken into account.
If you have any questions about the
differences between the public phone
networks, please contact your specialist
dealer or network provider.
Swisscom hereby declare that this device
meets the essential requirements and
other relevant regulations laid down in
Directive 1999/5/EC.
The Declaration of Conformity can be found on
the following web site:
www.swisscom.com
Online Shop, Phone, Declaration of Conformity
or can be ordered from the following postal
address:
Swisscom Fixnet AG
RES-Voice
Customer Premises Equipments (CPE)
3050 Bern
under the rubric

Specifications

Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u
Sanyo Twicell 650
u
Sanyo Twicell 700
u
Panasonic 700mAh "for DECT"
u
GP 700mAh
u
Yuasa Technology AAA Phone 700
u
Varta Phone Power AAA 700mAh
u
GP 850 mAh
u
Sanyo NiMH 800
u
Yuasa Technologies AAA 800
The handset is supplied with recom-
mended batteries.
Handset operating times/charging
times
Capacity 650 mAh
Standby time approx. 170 hours (7 days)
Talktime around 13 hours
Charging time approx. 6 hours
The operating and charging times apply
only when using the recommended bat-
teries.
Note:
When the display backlight is switched on, the
standby time of the handset is reduced to
approx. 30 hours.
Base station power consumption
In standby mode: approx. 2 Watt
During a call: approx. 3 Watt
Appendix
53