Writing/Sending An Sms - Swisscom Aton CL400 User Manual

SMS (text messages)

Writing/sending an SMS

Writing an SMS
¢
v î
New SMS Select and press
~
Write an SMS.
Press the display key.
§Options§
Select and press
Send
Select and press
SMS
Sending an SMS
s / ~
Select number with area code
(even if you are in that area)
from the directory or enter it
directly. For SMS to an SMS
mailbox: put the mailbox ID at
the end of the number.
Press the display key. The SMS
§Send§
is sent.
Notes:
– If you are interrupted by an external call
while writing an SMS, the text is automati-
cally saved in the draft message list.
– If the memory is full, or if the SMS function
on the base station is being used by
another handset, this cancels the opera-
tion. An appropriate message appears in
the display. Delete SMS messages you no
longer require or send the SMS later.
Setting input language
¤
You are writing an SMS (page 28).
Press the display key.
§Options§
Select Language
Select and press
s
Select input language and
press
§OK§
a
Press the end call key briefly
to return to the text panel.
The input language setting only applies to
the current SMS.
28
.
§OK§
.
§OK§
.
§OK§
.
§OK§
.
SMS status report
Precondition: Your service provider sup-
ports this feature.
If you have activated the status report, you
will receive a confirmation message after
sending an SMS.
Activating/deactivating a status report
¢ ¢
v î
Settings
Status Report
Select and press
Reading/deleting a status report
¤
Open the incoming message list
(page 30) and then:
q
Select SMS with the status
State OK
Press the display key.
§Read§
Or:
Press the display key. The text
§Delete§
message is deleted.
Draft message list
In the draft message list, you can save,
edit later and send an SMS. Your handset's
draft message list contains all saved SMS
messages of the assigned send MSN.
Saving an SMS in the draft message list
¤
You are writing an SMS (page 28).
Press the display key.
§Options§
Save Select and press
Opening the draft message list
¢ ¢
v î
Outgoing (3)
The first list entry is displayed, e.g.:
1234567890
21.09.05 09:45
* Currently not supported in the Swisscom
network.
*
‰
( = on).
§OK§
or
State not OK.
.
§OK§