Setting Handset; Changing The Display Language; Setting The Display - Swisscom Aton CL400 User Manual

Changing previously set internal
destination number
¢ ¢
v í
Room Monitor
s
Scroll to the
Press the display key.
§Edit§
Press the display key to con-
§Yes§
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 38).
¤
Save changes (page 55).
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Take the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will remain activated until you press
the display key
§OFF§
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with (page 38).
§Save§
Call to: line.
on the handset.

Setting handset

Your handset is preconfigured, but you
can change these settings to suit your
individual requirements.

Changing the display language

You can view the display texts in different
languages.
¢ ¢
v Ð
Handset
The current language is indicated by
s
Select a language and
press
§OK§
a
Press and hold (idle status).
If you accidentally choose a language you
do not understand:
v 5 41
Press keys one after the other.
s
Select the correct language
and press

Setting the display

You have a choice of four colour schemes
and several different contrasts.
¢ ¢
v Ð
Display
Colour Scheme
Select and press
s
Select a colour scheme and
press
§OK§
our).
a
Press briefly.
s
Scroll to the
Select and press
Contrast
r
Select contrast.
Press the display key.
§Save§
a
Press and hold (idle status).
Setting handset
¢
Language
‰
.
.
§OK§
.
§OK§
‰
( = current col-
line.
Contrast
.
§OK§
39
.