Making Calls; Making An External Call; Ending A Call; Answering A Call - Swisscom Aton CL400 User Manual

Making calls

Making calls

Making an external call

External calls are calls using the public tel-
ephone network.
~ c
Enter the number and press
the talk key.
Or:
c ~
Press and hold the talk key
c and then enter the
number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
Note:
Dialling using the directory (page 1, page 22)
or calls list (page 25) saves time re-entering
numbers.

Ending a call

a
Press the end call key.

Answering a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree key
d.
You can answer the call by:
¤
Pressing the talk key c.
¤
Pressing the display key
¤
Pressing the handsfree key d.
14
.
§Accept§
If the handset is in the base station and
the function is activated
Auto Answer
(page 40), the handset will take a call
automatically when you lift it out of the
base.
If the ringtone is intrusive, press the dis-
play key . You can take the call as
§Silence§
long as it is displayed on the screen.

Rejecting a call

Press display key.
§Reject§
The call is rejected for the entire MSN
group.

Calling Line Identification

When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
u
Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identification):
the caller's number is transmitted.
– CLIP (Calling Line Identification
Presentation): the caller's number is
indicated.
u
You have arranged CLIP with your net-
*
work provider.
* In the Swisscom ISDN network, CLIP is
transmitted automatically.