Swisscom Aton CL400 User Manual page 31

Reading or deleting individual SMS
messages
¤
Open the draft message list and then:
q
Select SMS.
Press the display key. The
§Read§
entry will be displayed. Scroll
line by line using q.
Or:
Open menu.
§Options§
Delete Entry Press
§OK§
deleted.
Writing/editing an SMS
¤
You are reading an SMS in the draft
message list.
Open menu.
§Options§
You have the following options:
New SMS
Write a new SMS and then send
(page 28) or save.
Edit
Edit the text of the saved SMS and then
send (page 28).
Character Set
Text is shown in the selected character
set.
Deleting draft message list
¤
Open the draft message list and then:
Open menu.
§Options§
Select, press
Delete all
with
§Yes§
a
Press and hold (idle status).
. The text message is
and confirm
§OK§
. The list is cleared.
Sending SMS messages to an e-mail
*
address
If your service provider supports the SMS
to e-mail feature, you can also send your
SMS messages to e-mail addresses.
The e-mail address must be at the begin-
ning of the text. You must send the SMS to
the e-mail service of your SMS active send
service centre.
¢ ¢
v î
New SMS
~
Enter the e-mail address. End
the entry with a space or colon
(depending on the service pro-
vider).
~
Enter the message.
Press the display key.
§Options§
Select and press
Send
E-mail Select and press
number of the e-mail service is
not entered (page 32), enter
the number of the e-mail serv-
ice.
Press the display key. The SMS
§Send§
is sent.
Sending SMS messages as a fax
You can also send an SMS to a fax
machine.
Precondition: Your service provider sup-
ports this feature.
¤
You are writing an SMS (page 28).
Press the display key.
§Options§
Select and press
Send
Select and press
Fax
s / ~
Select number from the direc-
tory or enter directly. Enter the
number with dialling code
(even when you are in the
same area).
Press the display key. The SMS
§Send§
is sent.
* Provider-dependent. Currently not
supported in the Swisscom network.
SMS (text messages)
.
§OK§
. If the
§OK§
*
.
§OK§
.
§OK§
29