Ir Remote Control - HIKVISION DS-7604 User Manual

•
7PQRS/REC: (1) Enter numeral "7"; (2) Enter letters "PQRS"; (3) Manual record, for
direct access to manual record interface; manually enable/disable record.
•
8TUV/PTZ: (1) Enter numeral "8"; (2) Enter letters "TUV"; (3) Access PTZ control
interface.
•
9WXYZ/PREV: (1) Enter numeral "9"; (2) Enter letters "WXYZ"; (3) Multi-camera
display in live view.
•
0/A: (1) Enter numeral "0"; (2) switch between input methods (upper and lowercase
alphabet, symbols and numeric input).
5. Control Buttons:
•
Directional buttons: In menu mode, the direction buttons are used to navigate between
different fields and items and select setting parameters. In playback mode, the Up and Down
buttons are used to speed up and slow down record play, and the Left and Right buttons are
used to select the recording 30s forwards or backwards. In live view mode, these buttons can
be used to cycle through channels.
•
Enter: The Enter button is used to confirm selection in menu mode; or used to select
checkbox fields and ON/OFF switch. In playback mode, it can be used to play or pause the
video. In single-frame play mode, pressing the Enter button will advance the video by a
single frame. And in auto sequence view mode, the buttons can be used to pause / resume
auto sequence.

IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 6.
Batteries (2×AAA) must be installed before operation.
Figure6. IR Remote Control
The keys on the remote control closely resemble the ones found on the front panel. Referring to Figure 4, they
include:
1. POWER: Turn on/off DVR.
2. DEV: Enable/Disable Remote Control.
3. Alphanumeric: Same as Alphanumeric buttons on front panel.
www.cctvireland.ie
11
shop@cctvireland.ie