5.
Select Upgrade to begin update process.
6.
After the system firmware has been update, reboot the DVR.
Note:
If the DVR fails to update, please contact your system supplier for further assistance.
Restore Default Settings
To restore default factory settings to your DVR:
1.
Click Menu > Maintenance > Default to enter the Default Settings menu, shown in Figure 13.
Figure13. Default Settings Menu
2.
Select OK to restore factory defaults.
Note:
Network information such as IP address, subnet mask and gateway will not be restored.
View System Information
To view system information:
1.
Click Menu > Maintenance > Information to enter the Information menu, shown in Figure 14.
Figure14. System Information
2.
Select OK to exit to the previous screen.
www.cctvireland.ie
90
shop@cctvireland.ie