Rs-232 Port Settings - HIKVISION DS-7604 User Manual

Figure2. More Settings Menu
3. Configure the following settings:
•
Device Name: Name of the DVR used.
•
Device No.: Device number of DVR.
•
CVBS Output Brightness: Video output brightness.
•
Transparency: Menu transparency.
•
Operation Timeout: Set timeout time for menu inactivity. For example, if timeout time was set
to 5 minutes, after 5 minutes of inactivity in the General Settings menu, you'll be returned to the
Live View.
•
Enable Output Hint: To display output status in live view.
•
Event Hint: To display hint during live view, if exception happens.
•
CVBS Scaling: Enable/disable video output scaling for main/aux video output.

RS-232 Port Settings

To configure RS-232 devices to be used with the DVR:
1. Click Menu > Setting > RS232 to enter the RS-232 Settings menu, shown in Figure3.
Figure3. RS-232 Settings Menu
2. Configure RS-232 Settings.
3. The RS-232 port can be used in two ways:
• Parameter Control: Connect from PC to the DVR using the PC serial port. Device parameters
can then be set using software such as HyperTerminal. The serial port parameters must be the
same as the DVR's when connecting with the PC serial port.
www.cctvireland.ie
84
shop@cctvireland.ie