System Configuration - HighPoint RocketRAID 231x User Manual

RocketRAID 231x Driver and Software Installation

System Configuration

This function is used to modify the service configuration on a remote system. To
change the service configuration:
1. Highlight the "File" menu and select the "Remote Control" function.
2. Highlight the remote system you want to modify.
3. Select the "System Configuration" option from the "Operation" menu.
4. Modify the information in the popup window.
System Port - This is the TCP port number that the RAID Management Service uses
to communicate with RAID Management Console. When you connect to the service,
the port value you enter must be in accordance with the system port value on the
service. The default value is 7402.
Event Port - The client software will retrieve events through this port. The default
value is 7403.
The System Port value must differ from the value assigned to the Event Port. After
you reset a system's configuration, you should restart the service on that system for
the changes to take effect.
5. Click "OK" to apply the changes.
4-22