System Configuration - HighPoint RocketRAID 230x User Manual

RocketRAID 230x Driver and Software Installation
1. Highlight the "File" menu and select the "Remote Control" function.
2. Highlight the remote system you to establish a connection with.
3. Click the "Connect" button on the toolbar or select the "Connect" command from
the "Operation" menu.
4. Enter the appropriate Login information in the popup window.
Note: The initial user name/password for a remote system is RAID/hpt. You are free
to modify the username and password after the connection is established.
If the connection is successful established, the application will retrieve the event logs
from the remote system, then switch to Array Management view.
Disconnect Remote System
This function closes the connection from a connected system. To disconnect a
remote system:
1. Highlight the "File" menu and select the "Remote Control" function.
2. Highlight the system you want to disconnect from.
3. Select the "Disconnect" command from the "Operation" menu.

System Configuration

This function is used to modify the service configuration on a remote system.
4-22