RocketRAID 231x Driver and Software Installation
Select the task type and the array that you want to verify or rebuild, then click
"Next".
1. Enter a name for the task.
2. Configure the frequency for the task.
3. Set the duration for the task.
4. Check the "Enable the task" option to activate this task.
5. Click "Finish".
Modify a Scheduled Task
This command is used to change settings for a scheduled task. To Modify a Task
Schedule:
1. Select a task from the Task schedule list.
2. Click the "Modify" button on the toolbar, and modify the task settings in the popup
window.
Delete a Scheduled Task
This command is used to delete a Scheduled Task for the selected remote system.
4-18