Misc. Array/Device Options - HighPoint RocketRAID 231x User Manual

3. During the OCE/ORLM procedure, the redundancy level of the array will be
the lowest of the source and target arrays; e.g. if you ORLM a RAID0 array
to a RAID1 array, the array will be non-redundant until the procedure is
complete.
4. The OCE/ORLM process can be aborted and continued at later time.
However, you should always stop the transform progress from the RAID
Management software.
5. An unexpected system crash may result in data loss while performing OCE/
ORLM on an array.

8 - Misc. Array/Device Options

Device Management
The Device Management window provides configuration information about control-
lers (the RocketRAID host adapter), channels and hard disks.
To access the Device Management window, highlight the "Management" menu, and
select the "Device Management" function.
Changing Device Settings
Depending upon the hard disk in question, and support provided by the current
device driver, you can adjust settings for disk: Read Ahead, Write Cache, TCQ, and
NCQ. Each feature can be enabled or disabled individually.
S.M.A.R.T Status
You can view S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology)
data about a drive to help troubleshoot any problems that occur. You can also setup
periodical S.M.A.R.T. status checks that send notification messages when S.M.A.R.
T. thresholds are exceeded.
To view the S.M.A.R.T status of a hard disk:
1. Highlight the "Management" menu, and select the " Device Management"
function.
2. Highlight the disk you want to examine.
RocketRAID 231x Driver and Software Installation
4-13