HighPoint RocketRAID 231x User Manual page 75

BTX loader 1.00
Console: internal video/keyboard
BIOS driver A: is disk0
BIOS driver C: is disk2
BIOS 636kB/74512kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(mailto:jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19 GMT
2001)
Loading /boot/defaults/loader.conf
/kernel text=0x24f1db data=0x3007ec+0x2062c -
<- For FreeBSD 5.1 and later: select "6" on "Welcome to
FreeBSD" screen.
Hit [Enter] to boot immediately, or any other key for
command prompt.
Booting [kernel] in 9 seconds...
<-press SPACE key
Type '?' for a list of commands, 'help' for more de-
tailed help.
ok load rr2310_00
/modules/rr2310_00.ko text=0xf571 data=0x2c8+0x254
ok autoboot
Note: If you have configured a RAID 10 using 4 disks, it will be registered to system
as device /dev/da0. You can use "/stand/sysinstall" to create partitions and
disklabels (like da0s1e) on da0. Then, create a new filesystem using "newfs /dev/
da0s1e". Now you can mount /dev/da0s1e to somewhere to access it
Step 3 Configure System to Automatically Load the Driver
To avoid typing in "load rr2310_00" each time the operating system is booted, the
system must be instructed to automatically load the module during bootup. To
configure the system to automatically install the module, type in the following
commands:
# echo 'rr2310_00_load="YES"' >> /boot/defaults/
loader.conf
BTX version is 1.01
FreeBSD Driver Support
6-6