Alarm-Out Screen; Figure 27 - Alarm-Out Settings Screen; Figure 28 - Alarm-Out Schedule Screen - Eneo DLR4-08 Operating Instructions Manual

Alarm-Out Screen

Highlight Alarm-Out in the Devices menu and press the
settings and establish a schedule for each alarm output from the DVR.
Figure 27 — Alarm-Out Settings screen.
Highlighting the Schedule tab causes the Schedule screen to display.
Figure 28 — Alarm-Out Schedule screen.
The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On, the Alarm-Out is
active during the scheduled time. When set to Event, the Alarm-Out is only active when there is an Event during the
scheduled time.
The Channels box allows you to set which alarm outputs will be active. You can also select the DVR's internal buzzer.
The box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish
to delete the schedule.
button. The Alarm-Out screen allows you to change the
Each alarm output can be given its own title by highlighting
the box under the Title heading and pressing the
A virtual keyboard appears allowing you to enter the title.
Highlighting the box under the Type heading allows to set
the alarm output for NO or NC (normally open or normally
closed).
Highlighting the box beside Dwell Time and pressing the
button allows you to set the dwell time of the alarm output.
Dwell times range from 5 seconds to 30 minutes.
You can add and edit alarm output schedules on this screen.
Highlight the + and press the
Highlighting the boxes under the Column heading and
pressing the button allows you to edit the information in
those boxes.
The Day box allows you to select the days that the alarm
schedule will be active. The choices are: Sun, Mon, Tue,
Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm
schedule will be active in 15-minute increments from 00:00
to 24:00.
Digital Video Recorder
button.
button to add a schedule.
23