Event Search - Dedicated Micros DV-IP Decoder Installation And Operation Manual

Event Search

The Event Search menu allows recorded event images to be quickly searched for and reviewed.
The Search criteria can be limited to a specific date/time and/or individual cameras.
Note: Event Search will only be available when the 'Enable Event Search Page' option is enabled
via the System Settings->Features menu.
Event/Page
Start Date
Start Time
End Date
End Time
Cameras
Search (Red)
Dedicated Micros ©2010
Select the amount of event Still images (thumbnail size) to be
displayed per results page.
Enter a Start Date for the Event Search.
Enter a Start Time for the Event Search.
Enter an End Date for the Event Search.
Enter an End Time for the Event Search.
Select the camera channel(s) to be included in the Event Search.
A range of cameras can be selected by entering a hyphen
between the first and last required camera i.e.1-8. A selection of
individual cameras can be chosen by entering a comma between
each camera i.e. 1,3,5,8. Events captured by cameras not in this
selection will be ignored.
When the Event Search parameters have been entered,
select 'Search'.
55