Remote Reporting - Dedicated Micros DV-IP Decoder Installation And Operation Manual

Remote Reporting

This menu details the configuration requirements for the unit to report to a Remote Video Receiving
Centre (RVRC) following alarm activation.
Note: This menu will only be displayed if 'Remote Reporting' is selected in the
System Settings->Features menu.
Primary Hostname
Primary Dial Profile
Secondary Hostname
Secondary Dial Profile
Public (NAT) Address
Video Server Port
48
This is the IP address or URL of the initial host that the unit will
transmit an alarm message to.
It is possible for the alarm message to be transmitted via the
Ethernet network.
If the unit is unable to contact the primary host, an alternative
route can be identified via a secondary host. If there is only one
alarm receiving IP address, you must enter the details in both the
primary and secondary connection settings.
It is possible to select a separate dial profile for the
secondary host.
This is the public IP (or domain name) for a unit connected to
the Internet via a NAT Router or Firewall. This field should be left
blank if NAT is not used e.g. a private network.
This field allows the RVRC to connect to the unit through a router
that is using port forwarding e.g. if the video server does not
appear on port 80 (HTTP), to the external network. Enter the port
number used for forwarding here if required.
Dedicated Micros ©2010