Table of Contents
Advertisement
Viewer Defaults
This page allow the monitor output settings to be configured.
Default Image Format
Default Image Req
Default Multi Req
Startup Multi Display
Startup Camera
Video Output mode
34
Images from connected cameras can be displayed in either JPEG
or MPEG format.
Images displayed full screen in the Viewer menus can be shown
in either High Medium or Low resolution.
Images displayed in Multi format in the Viewer menus can be
displayed in either High Medium or Low resolution.
When accessing the Viewer function, select the display format
which will initially be displayed.
When accessing the Viewer function, select the camera image
which will initially be displayed. If one of the multi display formats
has been selected via the 'Startup Multi Display' option, the
camera channel selected here will be displayed in first (top
left) position. Subsequent camera channels will be displayed in
sequential order.
Select 'Mon Config' (Green) to open the Configure Monitors
page (Configuration Menu:Display Settings->Configure
Monitors).
Dedicated Micros ©2010
Advertisement
Table of Contents
Need help?
Do you have a question about the DV-IP Decoder and is the answer not in the manual?
Questions and answers