Time And Date - Dedicated Micros DV-IP Decoder Installation And Operation Manual

Time and Date

This menu allows the time and date to be set on the unit. Required timezone information can also be
established and the unit time synchronised to that of the PC being used to view the webpages.
System Time
Current Time Zone
Time Zone
Reset (Red)
Date Format
Time Format
Set Time
Set Date
Set Time (Green)
SNTP Server
24
The current system time and date is displayed.
Displays the currently selected time zone settings.
Select the relevant timezone offset from the accompanying drop
down menu.
When a change has been made to the unit's Time Zone setting, it
is necessary to reset the unit before the change will take effect.
As default, the date is entered dd/mm/yy. It can also be displayed
as mm/dd/yy or yy/mm/dd.
As default, the time displayed is in 12 hour format. This can be
changed to 24 hour if required.
Enter a current time for the unit.
Enter a current date for the unit.
When current time/date as been entered, select this button to
implement changes.
A Simple Network Time Protocol (SNTP) server allows external
devices to connect and set their current date and time settings to
that of the SNTP. If required, enter the SNTP server IP
address here.
Dedicated Micros ©2010