Powerscript Mgmt - Dedicated Micros DV-IP Decoder Installation And Operation Manual

PowerScript Mgmt

This page enables you to select which PowerScripts are automatically run when the unit starts up.
Use the tickboxes below to select which scripts you require and then click Save. You will need to
restart your unit for the changes to take effect.
NOTE: Clicking Save will alter DEFAULT.C, if you already have a custom PowerScript on your
unit which uses the DEFAULT.C file, please contact your regional Technical Support for
guidance before effecting any changes to this page.
PowerScript
Run At Startup
Description
32
Identifies which powerscript is being configured.
Specifies whether the powerscript will run when the unit boots up.
Displays the description associated with the PowerScript.
Dedicated Micros ©2010