Dedicated Micros DV-IP Decoder Installation And Operation Manual page 42

Network
This menu allows additional network settings to be configured if required. If utilising the 1Gb network
connection, enter address details via Network Settings->Gb Network.
Server Name
IP Address
Sub Net
Gateway
Primary DNS
Max Transmission Rate
Tx Image Buffers
Ethernet MTU
42
This field can be edited to allocate a name to the unit. This would
be used if accessing the unit via a Domain Name Server (DNS).
This is the IP address allocated to the unit.
This is the subnet of the network were the unit is located.
This is the IP address of the default gateway (router).
This is the primary DNS server IP address for applications utilising
domain names.
Shows the maximum transmission speed for the network type.
This is used in order to improve the picture delivery over Ethernet
when using a slow connection i.e. 256Kbps. A buffer setting of 1,2
or 3 is available.
This is the maximum transmit unit for the Ethernet packet. The
MTU is the largest physical packet size measured in bytes that the
network can transmit. By default this figure is set to 1500bytes.
Dedicated Micros ©2010