Dedicated Micros DV-IP Decoder Installation And Operation Manual page 38

Enable custom segment setup
Camera selection switches
to full screen
Spot monitor text
Spot Sequence Dwell
Spot Sequence Setup
Select All (blue)
38
Select to activate the custom segment setup feature. When
selected, a user can configure a Quad or Multiscreen layout via
the Viewer menu. The configured layout can include any camera
in any available segment.
Select to auto switch to full screen mode any camera channel
selected from Multi display (selected via the Viewer feature).
It is possible to select text to be displayed on the spot monitor.
The text displayed will include; time, date, camera number and
camera title.
The spot sequence dwell time can be set from 1 to 99 seconds.
The dwell time is the period a camera's images are displayed on
a connected spot monitor before switching to the next camera in
the sequence.
All of the unit's camera input channels are shown. To include any
of these camera channels in the spot monitor sequence, selected
the accompanying tickbox.
Select to highlight all spot sequence camera channel tickboxes.
Dedicated Micros ©2010