Table of Contents
Advertisement
Firewall
This menu allows the user to block access to the unit via specific network port(s).
Enable Ping Response
Table Entry
Open TCP ports
Open UDP ports
54
Enabling this option will allow an external client to receive a
response when attempting to 'ping' the unit. Disabling this option
will make the unit less visible on the network.
Up to 32 Configuration settings may be entered.
This option can identify which system TCP ports are available. If a
host tries to communicate with the unit using a TCP
port that is not within the 'open' range (even with a valid IP
address), access will not be granted to the unit. The enabled ports
can be a range or single port address, if a single port is needed
then enter the same port number in the to and from section.
This option can identify which system UDP ports are available. If
a host tries to communicate with the unit using a UDP port that is
not within the 'open' range (even with a valid IP address), access
will not be granted to the unit. The enabled ports can be a range
or single port address, if a single port is needed then enter the
same port number in the to and from section. Event Search
Dedicated Micros ©2010
Advertisement
Table of Contents
Need help?
Do you have a question about the DV-IP Decoder and is the answer not in the manual?
Questions and answers