Dedicated Micros DV-IP Decoder Installation And Operation Manual page 46

EMail
The unit can automatically transmit an e-mail to an SMTP Server under numerous conditions i.e. on
start up, on receipt of an alarm, camera failure etc. This allows the unit to be installed in unmanned
applications where a Remote Video Response Centre (or Manager etc.) would be notified by e-mail
if any of these conditions occur.
Connection Profile
Mail Server Address
Recipient Email
Display Name (Recipient)
Reply to Email
46
It is possible for the e-mail to be transmitted via the Ethernet
network. This setting presumes that a modem has been
connected or configured and the unit is connected to a LAN or
WAN and allocated a valid IP address.
This is the IP address or URL of the SMTP Server that the e-mail
will be sent to. The SMTP server will then forward this to the
intended recipient.
This is the e-mail address of the intended recipient.
This is the addressee name that will be shown in the email
name field.
This field must be configured if the recipient is to reply to an
e-mail. The unit does not accept incoming emails therefore ensure
this is a valid e-mail address.
Dedicated Micros ©2010