Dedicated Micros DV-IP Decoder Installation And Operation Manual page 49

Alarm Server ref. ID
Remote Alarm Reporting
Remote Cam Fail Reporting
Remote Startup Reporting
ARC Ping Enabled
Note: Some routers will not respond to 'Ping'.
Alarm Responder Port
Dial Retry Time (secs)
Dial Count
Dedicated Micros ©2010
This is the reference name/ID that will be presented to the RVRC
viewing application. It should therefore have some significance to
the Operator.
This must be enabled for the unit to automatically connect
on alarm.
Enabling this option ensures the unit reports camera failure on
any of the inputs to the RVRC.
This will send an alarm report when the unit starts up. Any system
resets will be identified.
Should the modem/router at the Alarm Receiving Centre be dormant,
the unit will 'Ping' the ARC prior to sending reporting data.
This specifies the network port number used for reporting to the
alarm server. In normal circumstances this should be left at the
default value (23).
If the initial connection attempt fails, the unit will wait for the
specified time period (in seconds) before attempting to re-connect.
This is the time (in minutes) the unit will continue to attempt to
connect. A setting of '0' means no limit and the unit will continue to
try and connect until successful.
49