Table of Contents
Advertisement
This
message...
PAPER JAM
DUPLEX
PAPER JAM
EXIT
PAPER JAM
FUSER
PAPER JAM
TRANSFER
PAPER JAM
TRAY 2
PUT
"SIZE"
"TYPE"
IN TRAY 1
PUT
"SIZE"
"TYPE"
IN TRAY 2
TOP COVER
OPEN
X TONER
LIFE END
Status, Error, and Service Messages
means...
Media has misfed in the
duplex option.
Media has misfed in the fuser
area.
Media has misfed in the trans-
fer roller area. This type of
misfeed means that the media
did not make it to the paper
exit area.
Media has misfed while being
pulled from Tray 2.
The size of paper being
printed on is different from the
size of paper specified in the
printer driver.
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 2.
The printer's top cover is
open.
The imaging cartridge is not
installed.
A imaging cartridge incompati-
ble with the machine is
installed.
The X toner cartridge has
reached the end of its life.
do this...
Locate and remove the mis-
feed.
Locate and remove the mis-
feed.
Load the correct paper on
Tray 1, and press the
ENTER key, then specify the
size and type of the paper.
Open Tray 2 and keep
correct paper size. Then
close Tray 2.
Specify the correct paper
size in the
MAIN MENU/
PAPER MENU/INPUT
TRAY/TRAY2/MEDIA
menu.
SIZE
Close the top cover.
Install the imaging cartridge.
Replace the imaging car-
tridge with a correct one.
Replace the toner cartridge.
8-33
Advertisement
Table of Contents
