Table of Contents
Advertisement
Symptom
Media is
wrinkled.
The date and
time is not
correctly
maintained
on the
printer.
Solving Other Problems
Cause
The media is moist
from humidity or hav-
ing water spilled on it.
The media feed roller
or fuser unit is defec-
tive.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
The backup battery
has reached the end
of its service life.
Solution
Remove the moist media and replace it
with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Use good quality recommended media.
See "Print Media" on page 5-2.
Contact Technical Support.
8-23
Advertisement
Table of Contents
