Storing, Deleting, And Using Original Sizes; G Storing Or Deleting An Original Size; Storing Or Deleting An Original Size - Sharp AR-M550N Operation Manual

STORING, DELETING, AND USING
ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
copy that size of document.
G To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.

Storing or deleting an original size

1 Touch the [ORIGINAL] key.
0
AUTO
ORIGINAL
AUTO
EXPOSURE
2 Touch the [CUSTOM SIZE] key.
AUTO
AUTO
AB
EXPOSURE
MANUAL
INCH
AUTO A4
PAPER SE
CUSTOM
100%
SIZE
E INPUT
COPY RAT
3 Touch the [STORE/DELETE] key.
AUTO
MANUA
CUSTO
SIZE
L
STORE/DELETE
4 Touch the original size key (
you wish to store or delete.
X5 Y10 1 / 1 /
2
8
RECALL STORE/DELETE
To delete or change a stored size, touch the key
that shows the size that you wish to delete or
change.
GIf you are storing an original size, go to step 5.
GTo delete or change an original size, go to
step 7.
4-6
) that
To store an original size,
touch a key that does not
show a size ( ).
Keys that already have
an original size stored
will show the stored size
( ).
1 / 1 /
X5 Y10
2 8
5 Enter the X (width) and Y (length)
dimensions of the original with the
keys.
X
CANCEL OK
A Y
(2 1/2 17)
17
X
inch
(2 1/2 11 5/8)
Y
11 5/8
inch
RECALL STORE/DELETE
to 11-5/8 inches can be entered in Y.
Touch the [OK] key.
6
The original size entered in step 5 is stored in the
key selected in step 4.
To exit, touch the [ORIGINAL] key.
When you touch a key that shows an
7
original size in step 4, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [STORE].
GTo cancel the procedure, touch the [CANCEL]
key.
GTo delete the selected original size, touch the
[DELETE] key.
GTo change the original size stored in the key,
touch the [STORE] key. The screen of step 5
will appear to let you change the size.
8 To exit, touch the [ORIGINAL] key.
I I I I USING A STORED ORIGINAL SIZE
1 Follow steps 1 to 2 of "STORING OR
DELETING AN ORIGINAL SIZE".
2 Touch the original size key that you wish
to use.
1 / 1 /
X5 Y10
2 8
RECALL STORE/DELETE
3 Touch the [OK] key.
The stored original size is called up.
X (width) is initially
selected.
Enter X and then touch
the ( ) key to enter Y.
A width of 2-1/2 to 17
inches can be entered in
X, and a length of 2-1/2