Computer System Selection - Sanyo PLC-WXU700 Owner's Manual

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
UXGA or WUXGA with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal
source, this projector automatically detects the signal format and tunes to project a proper image without any
additional settings. (Signal formats provided in this projector are shown on pages 76-77)
One of the following messages may appear when:
The projector cannot recognize the connected
Auto
signal conforming to the provided PC Systems.
Auto is displayed on the System Menu box
and the Auto PC adjustment function works
to display proper images. If the image is not
projected properly, a manual adjustment is
required (pp.34-35).
There is no signal input from the computer.
-----
Check the connection between your computer
and the projector. (See "Troubleshooting" on
pp.69-72.)
The preset system is manually adjusted in the
Mode 1
PC adjust Menu. The adjusted data can be
stored in Mode 1-5 (pp.34-35).
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
▲▼
press the Point
3
Use the Point
▲▼
and then press the SELECT button.
3
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Systerm and then
or the SELECT button.
►
buttons to select the desired system
PC System Menu
The PC System Menu
Selected system is
displayed.
Customized Mode (1–5)
set in the PC adjust Menu
(pp.34-35).
PC System Menu
Systems in this dialog box
can be selected.
RGB(Computer 1)