Computer System Selection - Sanyo LC-XBL20 Owner's Manual

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings. (Signal formats provided in this projector are shown on page 70.)
One of the following messages may appear when:
The projector cannot recognize the connected
Auto
signal conforming to the provided PC Systems.
Auto is displayed on the System Menu box
and the Auto PC Adjustment function works
to display proper images. If the image is not
projected properly, a manual adjustment is
required (pp.30-31).
There is no signal input from the computer.
-----
Check the connection between your computer
and the projector. (See "Troubleshooting" on
p.64.)
The preset system is manually adjusted in the
Mode 1
PC adjust Menu. The adjusted data can be
stored in Mode 1–5 (pp.30-31).
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
2 ▲▼
press the Point
Use the Point
▲▼
3
and then press the SELECT button.
28
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select System and then
or the SELECT button.
►
buttons to select the desired system
PC System Menu
The PC System Menu
Selected system is
displayed.
PC System Menu
Systems in this dialog box
can be selected.
Customized Mode
(1–5) set in the
PC adjust Menu
(pp.30-31).
RGB(Computer 1)