Battery And Power Management Tips; Changing The Power Plan - Motion Computing CL910 User Manual

Battery and power management tips

•
To lengthen the battery's life, use AC power when you can. The battery charges
automatically when the tablet runs on AC power.
•
For optimal battery life, use AC power when using a USB device such as a DVD player or
external hard disk drive.
•
When running on battery power, place the tablet in Hibernate or Sleep mode if you are
going to leave it unattended for more than a few minutes. For more information on
Hibernate and Sleep mode, see
•
Remember that the display, processor, wireless cards and accessories all draw on the
battery, so adjust properties and disable unused accessories while running on battery
power.
•
Condition your battery once a month. To condition it, run the tablet on battery power
until the battery's charge level drops below 20%.
•
When running on battery power, adjust the display to a dimmer setting and enable the
Dynamic Brightness Preference. Open
Dynamic.
•
Turn off wireless devices when they are not being used. Open
the Wireless tab, and clear the checkbox next to the wireless device you want to disable.

Changing the power plan

By default, the CL910 uses the Motion Optimized power plan, which is designed specifically
for Motion Computing tablets. It balances the need to save power while maximizing tablet
performance. When the tablet senses no current activity, it goes into Power Saver mode
automatically.
If necessary, you can change the Motion Optimized power plan from the Motion
Dashboard.
To change the power plan:
1. Open
2. Tap Power.
3. Tap Power Options.
4. Select a power plan from the list of available plans.
N : Setting the power plan to Power Saver reduces the tablet's performance, but it will extend
OTE
battery life.
Chapter 2 Using your CL910
Motion Dashboard.
Changing how the power button functions
Motion Dashboard, tap the Display tab and tap
on page 50.
Motion Dashboard, tap
Using the battery 49