Adjusting Tablet Pc Settings; Entering Text And Handwriting Recognition - Motion Computing CL910 User Manual

Adjusting tablet PC settings

From Tablet PC Settings, you can change from right-handed to left-handed use.
To change hand orientation:
1. Open
2. Tap Pen & Tablet.
3. Tap Tablet PC Settings.
4. Tap the Other tab and make your desired change.
The Tablet PC Settings Display tab has a Calibrate option. This does not apply to the
CL910. Instead, if touch input does not behave as expected, you can tune touch as
described in
The Configure your pen and touch displays option on the Tablet PC Settings Display
tab is useful for assigning touch to the appropriate display when one or more displays are
connected to the tablet. By default, Windows® 7 assumes that an external display is for
touch input. To change this, run Setup from Tablet PC Settings to assign touch to your
tablet display.
N : A keyboard must be connected to the tablet to perform this procedure.
OTE
To assign touch to the desired display:
1. Open
2. Tap Pen & Tablet.
3. Tap Tablet PC Settings.
4. Tap the Display tab.
5. Tap Setup next to "Configure your pen and touch displays. "
6. Tap Touch Input.
7. Press the Enter key until you see the instructions appear on the display that you want to
use for touch input.
8. Follow the on-screen instructions.
9. Press Esc to end the process.

Entering text and handwriting recognition

You can enter text by either tapping characters on an on-screen keyboard or writing on a
virtual writing pad. When you write on the writing pad, your handwriting converts to digital
ink. "Digital inking" refers to the process of converting your handwriting to text. In the
following picture of the writing pad, someone started writing Motion Computing and
"Motion" has already been converted into digital ink.
Chapter 2 Using your CL910
Motion Dashboard.
Using the touch tuning option
Motion Dashboard.
on page 21.
Entering text and handwriting recognition 23