Using The Cameras With Motion Quicknav - Motion Computing CL910 User Manual

2. Tap the Options icon
•
•
•
N : Motion QuickNav does not support PDF417 barcodes.
OTE
To use the Motion QuickNav voice recorder:
1. Open the
2. You can choose to:
•
•
•
3. Tap the Options icon
change the location of your voice journal.
Note: For another way to use speech, see
To use the Motion QuickNav video recorder:
1. Open the
2. Tap the appropriate icons to start, pause, save, or cancel a recording.
3. Tap the Options icon
playback, or to change the folder where your videos are stored.

Using the cameras with Motion QuickNav

Your CL910 comes equipped with two built-in cameras:
•
Front-facing web camera—a 1.3 MP camera that supports streaming video.
•
Rear-facing documentation camera—a 3.0 MP JPEG format camera with a maximum
resolution of 2048x1536 pixels, which supports taking photos and capturing video.
The cameras can work with any application that uses a camera, such as Skype™, Windows®
Live™ or Windows® Movie Maker.
Chapter 2 Using your CL910
to set up the scanner. You can choose to:
Set the type of barcode the scanner recognizes. For best performance, disable the
codes you do not need.
Use the front- or rear-facing camera to scan the codes.
Change the resolution. Use a higher the resolution to improve accuracy; use a lower
resolution to improve performance.
Motion QuickNav toolbar
Send a voice message by email.
Create a voice journal and add voice messages to it.
Add a voice note to an active application.
to set up the device to use for recording or playback or to
Motion QuickNav toolbar
to set the video quality, the device to use for recording or
then tap the voice recorder icon
Using speech recognition
then tap the video recorder icon
Using the cameras with Motion QuickNav 30
.
on page 43.
.