Lan Setting - Planet VIP-281 Series User Manual

Note

LAN Setting

There are two kinds of network feature to configure: Bridge Mode and NAT Mode:
Bridge Mode
NAT Mode
LAN IP Network Configuration
IP Address: Private IP address for connecting to a local private network (Default: 192.168.0.1).
Subnet Mask: Netmask for the local private network (Default: 255.255.255.0).
WAN port display the IP address, Subnet Mask and default
gateway IP address if DHCP client is successful
Select this VIP-Gw as Bridge. (WAN Port and LAN Port use the same IP
address)
Each of the VIP-GW has two Ethernet interfaces, one is for connecting to
local network users, and the other is for connecting to an external
broadband device (i.e. DSL modem/router or Cable modem). The LAN port
is connected to the local Ethernet network. WAN is connected to the
external broadband device. The LAN IP address/netmask is for private
users or NAT users, and the WAN IP address/netmask is for public users.
24