Chapter 2 Preparations & Installation; Physical Installation Requirement - Planet VIP-281 Series User Manual

Physical Installation Requirement

This chapter illustrates basic installation of VIP-GW series
•
Network cables. Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors.
•
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for
WAN port usage)
Administration Interface
PLANET VIP-GW provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
To start VIP-GW web configuration, you must have one of these web browsers installed on
computer for management
•
Netscape Communicator 4.03 or higher
•
Microsoft Internet Explorer 4.01 or higher with Java support
Default LAN interface IP address of VIP-GW is 192.168.0.1. You may now open your web browser, and
insert http://192.168.0.1 in the address bar of your web browser to logon VIP-GW web configuration
page.
VIP-GW will prompt for logon username/password, please enter: admin / 123 to continue machine
administration.
Preparations & Installation
:
Chapter 2
2