Vertical Term. 0,2 Or 4 45° Offsets (6-5/8") - FireplaceXtrordinair 2000 36 DV XL Owner's Manual

Installation
Vertical Terminations with 0, 2, or 4 45° Offsets using 6-5/8" Dia. Vent
• Use 6-5/8" diameter co-axial vent
• A Maximum of Four 45° Elbows May be Used
• 10' Minimum System Height (with or without offsets)
• 40' Maximum System Height
• 12' 8" Maximum Horizontal Offset
Offset Length Hor. Offset
None
1' Section
2' Section
3' Section
4' Section
• The termination must fall within the shaded area shown in the chart. Use the indicated restrictor position.
Zero or Two 45° Offsets
40' (max)
35 feet
30 feet
NOTE:
Restrictor positions are based upon lab tests. The
ideal restrictor position may vary slightly, especially
25 feet
when the termination is near the demarkation line.
20 feet
15 feet
Position # 1
10 feet
(min.)
5 feet
0 feet
Travis Industries
Vert. Rise
5" 1'
1' 1' 7"
1' 9" 2' 4"
2' 5" 3'
3' 2" 3' 8"
Restrictor
Position # 7
Restrictor
NOTE:
The maximum offset lengths,
combined, is four 4' sections.
9 3 5 0 8 1 1 8
(for qualified installers only)
Four 45° Offsets
40' (max) 40' (max)
35 feet 35 feet
30 feet 30 feet
25 feet 25 feet
20 feet 20 feet
15 feet 15 feet
10 feet 10 feet
(min.) (min.)
5 feet 5 feet
0 feet 0 feet
Horizontal
Offset
Vertical
Rise
Offset
Length
40' (max)
Restrictor
Position # 7
35 feet
NOTE:
Restrictor positions are based upon
lab tests. The ideal restrictor position
may vary slightly, especially when the
termination is near the demarkation
line.
30 feet
25 feet
20 feet
Restrictor
Position # 1
15 feet
10 feet
(min.)
NOTE:
The maximum offset
lengths, combined, is
5 feet
four 4' sections.
0 feet
2 7 0 9 0 0
1 9