Finalizing the Installation
Rear Vent Configuration with Horizontal Termination (no vertical rise)
The termination must fall within the shaded area shown in the chart. Use the indicated restrictor and
diffuser positions.
Use 8" diameter vent.
3 feet
915mm
0 feet
mm
© Travis Industries
(for qualified installers only)
- Remove the Exhaust Restrictor
and Install Exhaust Deflector
- Intake Restrictor # 1 (stock)
- Diffuser Position # 1 (stock)
• Max. 12" (102mm) Horizontal Section
• No Elbows Allowed
5/8/2019 - 1505
27
564 GSR2 25K CF