Restart Controller; U 320 Sc Si T Arget C Onfig - Xerox SAFEStor User Manual

SAFEStor User Guide

Restart Controller

This function allows you to restart the controller. Select Restart Controller from the
menu and press Enter. The Restart Controller confirmation screen appears. Select Yes to
restart the RAID controller.
NOTE: Ensure that there is no Host and Drive activity before restarting the controller.

U 320 SC SI T arget C onfig

This function allows you to configure U320 SCSI targets. Select U320 SCSI Target
Config from the Main Menu and press Enter.
The list of available U320 SCSI targets is displayed. Scroll to the required SCSI target and
press Enter. Select Disable to disable the SCSI target, or select Enable to enable the SCSI
target.
Page 63