Update Firmware - Xerox SAFEStor User Manual

SAFEStor User Guide
The Terminal Port Config function allows you to configure the terminal port. From this
screen you can set the Baud Rate and the Stop Bits values. Press Enter to select Baud Rate
or Stop Bit and edit the settings. Press ESC to save the change and return to the previous
menu.

Update Firmware

NOTE: You can update the firmware through the VT100 terminal via the
controller's serial port.
NOTE: You can update the firmware via the firmware-embedded web browser- based
RAID manager through the controller's 10/100 Ethernet LAN port.
Page 62