Generate Test Event; Clear Event Buffer; Modify Password - Xerox SAFEStor User Manual

SAFEStor User Guide
This screen shows the date and time that the events took place, the device that the event
was generated from and the type of the event etc.

Generate Test Event

This function allows you to generate a test event. This is used to ensure that your
event notification process is working correctly. Select Generate Test Event from
panel
the navigation to bring up the Generate Test Event screen.
Generate the test event by checking the Confirm The Operation check box and then click
Submit.

Clear Event Buffer

This function allows you to clear the event buffer. Select Clear Event Buffer from the
navigation panel to bring up the Clear Event Buffer screen.
To clear the event buffer, check the Confirm The Operation check box and then click
Submit.

Modify Password

This function allows you to change the password
modify the password, follow the procedure below:
2
If the password is changed from the default ensure that a note is keep in a safe secure place. Do not lose this
password.
2
used to log into the RAID Controller. To
Page 36