Delete Volume Set; Modify Volume Set - Xerox SAFEStor User Manual

SAFEStor User Guide
6. Repeat steps 3 to 5 to create additional volume sets.
7. The initialization progress is displayed at the bottom of the screen.

Delete Volume Set

To delete a Volume set, select the Delete Volume Set option by pressing Enter. The list of
all available RAID sets is displayed. Scroll to a RAID Set, then press Enter to show all
Volume Sets in the raid set. Select the Volume Set number you wish to delete and press
Enter to delete it.
CAUTION: Deleting a Volume Set is a destructive action that will cause the loss of
data existing in the Volume Set.

Modify Volume Set

Use this option to modify a volume set. To modify a Volume Set, select the Modify
Volume Set option, then press Enter. The list of all available RAID sets is displayed.
Scroll to the required Raid Set number and, press Enter to show all Volume Sets
associated with the RAID set.
Select the Volume Set you which to modify from the list and press Enter to modify it.
Page 50