Snmp Configuration - Xerox SAFEStor User Manual

Table of Contents

Advertisement

SAFEStor User Guide
3.
Once all the parameters have been set, check the Confirm The Operation check box and
then click Submit to configure email notification.

SNMP Configuration

This function allows you to configure SNMP settings for the RAID Controller. To configure the
SNMP settings, follow the procedure below:
1.
From the navigation panel, select SNMP Configuration. The SNMP attributes will be
displayed in the information panel.
2.
This screen contains the following fields:
SNMP Trap Configurations
SNMP System Configurations
SNMP Trap Notification
Configurations
Enter the IP Address and Port Number of the
SNMP traps.
Enter the SNMP System parameters here.
Enter a Community, Contact, Name and Location
Select the level of events for which you wish
SNMP traps sent using the check boxes.
Page 34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Safestor xrx-2psqx-651-u4Safestor xrx-2psqx-652-fc

Table of Contents