Delete Pass Through - Xerox SAFEStor User Manual

SAFEStor User Guide
4. The
following attributes can be modified on this screen:
Volume Cache Mode
Tagged Command Queuing
Max SCSI Speed
SCSI
Channel:SCSI_ID:SCSI_Lun
5. Once the changes have been made to the attributes of the Pass Through Drive, check
the Confirm The Operation check box and then click Submit to make the changes to the
Pass Through Drive.

Delete Pass Through

This function allows you to delete a Pass Through Drive. Once the Pass Through Drive has
been deleted the disk status is set to
RAID Sets, Hot Spare Drives etc. To delete a Pass Through Drive, follow the procedure
below:
1. From the navigation panel, select Delete Pass Through. The list of available Pass
Through Drives is shown in the information panel.
Change the Cache Mode to be applied to the Pass Through Drive
using the drop down list.
Change whether to enable or disable tagged command queuing
using the drop down list.
Change the maximum SCSI speed to be
applied to the Pass Through Drive using the
drop down list.
Assign a new SCSI Channel, SCSI ID and SCSI Lun to the Pass
Through Drive using the drop down list.
and it is again available to be used in the creation of
F ree
Page 28