Table of Contents
Advertisement
SAFEStor User Guide
Max Sync Rate
Check Volume Set
Use this option to verify the correctness of the redundant data in a volume set. For
example, in a system with dedicated parity, volume set check means computing the parity
of the data disk drives and comparing the results to the contents of the dedicated parity
disk drive.
To check a Volume Set, select Check Volume Set, then press Enter. Select a Raid Set
from the list, then press Enter to show all Volume Sets.
Select the Volume Set from the list and press Enter to select it. A confirmation screen is
displayed. Press Yes to start the check.
Stop Volume Set Check
Use this option to stop all Check Volume Set requests.
Display Volume Set Info.
To display Volume Set information, scroll to the desired Volume Set, then press Enter.
The Volume Set Information will be displayed as shown below. You can only view
information for one Volume Set at a time.
Physical Drive
Choose this option from the Main Menu to select a physical disk and perform operations
(described below) on it.
The RAID subsystem supports 320 MB/sec as the highest
data transfer rate for the Ultra 320 SCSI system.
Page 52
Advertisement
Table of Contents
