SAFEStor User Guide
2.
Using the check boxes, select the Pass Through Drive you wish to delete. Check the
Confirm The Operation check box and then click Submit to delete the Pass Through Drive.
Identify Drive
This function allows you to see where a disk drive is physically located within the storage
enclosure by making the drives LED flash on the front of the enclosure. To identify a drive,
follow the procedure below:
1.
From the navigation panel, select Identify Drive. The list of all available disk drives
is shown in the information pane.
2.
Using the check boxes, select the drive you wish to identify, then click Submit. The
LED for the disk drive will start to flash red on the front of the storage enclosure.
3.
To stop the LED from flashing, click on any function in the navigation panel.
Page 29